What are the functions of the galvanized layer of seamless galvanized pipe?

1. The zinc coating of the seamless galvanized pipe is thick, with detailed, uniform and non-porous crystals, and excellent corrosion resistance;

2. The zinc layer obtained by electroplating is relatively pure, and it corrodes slowly in the mist of acid, alkali, etc., and can effectively maintain the steel substrate;

3. Because the zinc coating has excellent ductility, it can be formed by cold punching, rolling, bending, etc. without damaging the coating.

4. The zinc coating is passivated by chromic acid to form white, colorful, military green, etc., beautiful and generous, with certain decorative properties;

5. With a thick and dense pure zinc layer covering the surface of the steel, it can prevent the steel substrate from touching any corrosive solution and protect the steel substrate from corrosion. In the general atmosphere, the surface of the zinc layer constitutes a very thin and dense zinc oxide layer surface, which is difficult to dissolve in water, so it has a certain maintenance effect on the steel substrate. If zinc oxide and other components in the atmosphere form insoluble zinc salts, the anti-corrosion effect is more promising.

6. With iron-zinc alloy layer, combined with compactness, it exhibits unique corrosion resistance in marine salt spray atmosphere and industrial atmosphere;

7. Because of the strong combination, zinc and iron are mutually soluble and have strong wear resistance;

8. After hot-dip galvanizing steel structural parts, it is equivalent to one annealing treatment, which can effectively improve the mechanical function of the steel matrix, eliminate the stress during forming and welding of steel parts, and is beneficial to turning the steel structural parts.

9. Because zinc has excellent ductility and its alloy layer is firmly attached to the steel base, hot-dipped parts can be formed by cold punching, rolling, wire drawing, and bending without damaging the coating;

10. The surface of the seamless pipe after hot-dip galvanizing is bright and beautiful.

11. The pure zinc layer is a layer of galvanized layer endowed with plasticity in hot-dip galvanizing. Its properties are basically close to pure zinc and have ductility, so it is rich in flexibility.